Recreational Vehicles
Trailers
Your shop tools are a major investment that will last for generations with proper maintenance. However, rust and residue buildup can make them useless in months. Here’s how to maintain and protect them.
BLADE & BIT™ – Removes resin, gum and pitch from saw blades, drill bits, tool tops, etc. Spray on, wait 60-90 seconds and wipe off.
RUST FREE™ – Removes rust and stains from any surface including cast iron and steel. Spray on, wait 30 to 60 seconds, and wipe off. For light rust or fingerprints spray on a rag and wipe off.
BOESHIELD T-9® – Rust prevention and lubrication from Boeing Aviation®. Spray on saw tables and all tools. Wipe off for thin-film lubrication, or let dry for storage protection. Contains no silicone or Teflon, will not pick up on wood.
Suggested Uses
Boeshield T-9® is a solvent and paraffin wax formula developed by Boeing Aviation for long term metal protection. It penetrates into metal pores, displaces moisture and dries to a thin waxy film.
Boeshield T-9® will protect firearms for months, both in the field and in storage.
Directions for use on Guns
Field Use: Spray on and wipe off. Repeat approximately once per week.
Storage Protection: Spray on and allow to dry. Repeat every six to twelve months. Respray and wipe off when ready to use.
Marine – Powerboats
Above Deck: Spray on all metal surfaces and wipe off excess.
• Motor Controls
• Outriggers
• Stanchions
• Railings
• Hinges
• Tower
• Locks/Latches
• Hatch Hardware
• Light Terminals
• Fuel and Water Covers
• Canvas Snaps
Below Deck: Spray liberally and Do Not Wipe
• Engine Exterior
• Engine
• Battery Terminals
• Electrical Panels
• Steering Linkages
• Thru Hull Fittings
• Bilge Pump
Marine – Sailboats
Above Deck: Spray on all metal surfaces and wipe off excess.
• Mast Head Sheaves
• Stranded Rigging
• Swage Joints
• Turn Buckles
• Snap Shackles
• Spinnaker Pole Ends
• Sail Slides
• Head Foils
• Stanchion Bases
• Hatch Hinges
• Sliding Hatch Covers
• Canvas Snaps
Below Deck: Spray liberally and Do Not Wipe
• Engine Exterior
• Engine
• Battery Terminals
• Electrical Panels
• Steering Linkages
• Thru Hull Fittings
• Bilge Pump
See what POWERBOAT REPORTS and Practical Sailor had to say about T-9®
“Our test of greases, oils and aerosols finds Boeshield T-9® and good old Vaseline are best buys in protecting metal brightwork.”
Why Boeshield T-9®?
Dear Consumer,
Thank you for your interest in our products.
Boeshield T-9® was developed and licensed by The Boeing Company to fill their need for a superior lubricant/protectant.
The formulation, based on a unique combination of solvents and waxes, is designed to penetrate metal pores and dissolve minor corrosion, then leave a resilient waxy coating that lasts for many months.
We began by successfully introducing Boeshield T-9® to the tough saltwater marine market for lubricating and protecting all metals. It works well on engines and deck hardware as well as electronics, batteries and wiring connections. It is non-conductive and will not cause short circuits.
For bicycle chains, T-9® has proven to be a tough, long lasting waterproof lubricant. Our sales keep growing every year despite many competitors.
On woodworking tool surfaces Boeshield T-9® recently topped all other surface treatments in Wood Magazine’s article on Rust Busters*. According to them: “Except for the section treated with Boeshield T-9® all sections have completely rusted over”. “There is only one choice for protectant as far as we’re concerned: Boeshield T-9®”.
We feel we have the best product of its type on the market. In fact, if you think you’ve found a better penetrating lubricant and protectant, let us know, and we will refund your purchase price.
® Trademark and Technology owned and licensed by
THE BOEING COMPANY